Bryce 30K Specifications Page 49
- Page / 119
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Printer Menu System
SETUP MENU
The Addressing Printer has a Setup Menu that lets you configure the Addressing Printer so it will
function correctly with the computer and computer software. Use the Setup Menu to also display
the menus in another language besides English. Hold down the [Menu] button for two (2)
seconds until SETUP MENU is displayed on the first line of the LCD. Select the desired menu
option when it appears on the second line of the LCD.
1. STOP ON FEED ERR (ERROR)
Use this option to stop the printer from feeding more media when an error occurs. Otherwise the
printer will continuously feed media until the record is accurately printed before continuing onto
the next record. Stopping the printer when an error occurs is helpful when the media is in short
supply.
Menu Items Selections Explanation
Off or On This item stops the printer from operating after a
“Early Feed Error” occurs.
2. FEEDER SIGNAL
The Feeder Signal option is for feeders that work with 5-volt DC signals. The printer will give a
signal to the feeder when it receives one or more records. When the Stop On Feed Error option is
turned ON and an error occurs the feeder signal will be cleared to stop the feeder. See Section
Connecting to the Conveyer /Feeder Port.
Menu Items Selections Explanation
A. None
Press the [Enter]
button to select this
item.
This item disables the Feeder Signal option.
B. On /Off
Control
Press the [Enter]
button to select this
item.
This item turns a 5 volt signal on whenever one or
more records are in the buffer to be printed.
The signal is turned off (0 volts) once the last record
in the buffer is being printed. Note: The signal will
also be turned off (0 volts) when a “Early Feed
Error” occurs while the Stop On Feed Err (Error)
option is enabled.
C. Pulse Off
Control
Press the [Enter]
button to select this
item.
This item turns on a 5 volt signal when the sensor
detects the piece to print the last record in the buffer
on.
The signal is turned on (5 volts) once the sensor
detects the piece to print the last record in the buffer
on.
Revision C 30K USERS MANUAL Section 6 - 10
P/N 90-00203-001
- 30K Addressing 1
- Canadian DOC Compliance 3
- TABLE OF CONTENTS 4
- Introduction 8
- Who is this 8
- Printer Particulars 9
- Configurations 9
- Parts of the Printer 10
- Printer 10
- Parts & 10
- Locations 10
- Note: AB switches are 11
- Setting up the Printer 13
- Connecting to 13
- Port: Teleco 13
- Connector 13
- Power On 14
- CAUTION 15
- Removing 16
- Cartridge 16
- Preparing 17
- Printer Tips 19
- Finding the Right 19
- Adjustment for 19
- Media Thickness 19
- Adjusting the 20
- Entry Roller 20
- Assembly 20
- Exit Idler 21
- Assemblies 21
- Head 2 Bank 22
- Head 1 Bank A 23
- Head 2 Bank A 23
- Head 3 Bank 23
- Head 3 Bank A 25
- Head 2 Bank 25
- Head 1 Bank A 25
- Banks Apart 26
- Banks together 27
- Synchronizing 28
- 3 Print Head 28
- Moving the 30
- Prolonging 31
- Cartridges 31
- Setting up a 33
- Attaching 35
- Setting the 37
- H-Block 37
- Setting up and using the 39
- Feed Ramp Extension 39
- Printer Menu System 40
- [+] / [-] 41
- What does the display show? 41
- Distance to Right 42
- 2. PRINT QUALITY 43
- 3. FONT 44
- 4. BARCODE 45
- 5. ADDRESS RECOVERY 45
- 6. CLEAR COUNTER 46
- 7. JOB SETTINGS 46
- 8. CONVEYER TIME 47
- 9. IMAGE OVERLAY 47
- 10. PURGE PRINT HEAD 48
- 11. RESET INK COUNT 48
- SETUP MENU 49
- 1. STOP ON FEED ERR (ERROR) 49
- 2. FEEDER SIGNAL 49
- 3. LINES PER ADDRESS 50
- 4. LINE TERMINATION 50
- 5. HEX DUMP MODE 51
- 6. LANGUAGE 51
- 7. TRANSPORT SPEED 52
- 8. POSTAL BUNDLE BRK (BREAK) 52
- XYZ Corporation 53
- Anytown, CT 06470-1234 53
- 9. PRE-PURGE 54
- 10. FEED GAP 54
- 11. ROM REVISION# 55
- 12. PRINT HEAD SIZE 55
- 2. TEST SYSTEM 59
- 3. TEST DISPLAY 59
- SYMPTOM 66
- CAUSE SOLUTION 66
- Preventative 69
- Maintenance: 69
- Side View 70
- Bottom View 70
- P/N 90-00203-001 73
- Hex Chart 78
- PCL Command Codes 79
- Character Sets 92
- Parallel 97
- Communication 97
- (Centronics 97
- Cable) 97
- Accessory Port 98
- Printer Software 99
- MICROSOFT WINDOWS 100
- Applications 100
- Software Driver Information 100
- P/N 90-00203-001 101
- Access 2000 for Window 98 102
- IBM Mini's (System 34 104
- 36, 38) & AS400) 104
- Word 2000 for Window 98 105
- Technical Specifications 107
- DELIVERY POINT BAR CODE 109
- Valid Address Formats 110
- PLANET Code Bar Code 111
- EAN / UCC Requirements 112
- Glossary 113
- Glossary 114
- Ordering Information 118
© 2020, manymanuals.com. All rights reserved. | 0.259 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals