Bryce 30K Specifications download pdf (Page 13)

Setting up the Printer

The Conveyer Port can maximize the operation of a conveyer

when used with the printer. Settings used for configuring the

port for a conveyer are found in the Main Menu.

Connecting to

the Conveyer

Port: Teleco

Connector

The port is designed to connect to the Bryce Pulse Box

(optional), then the box to the conveyer. With the Bryce Pulse

Box connected the conveyer will only operate while the

printer is printing addresses. The printer can control the

singling of the media onto the conveyer by fine tuning the

conveyer speed adjustment in the Main Menu of the printer.

These options will allow the maximum number of pieces of

media to be fed onto the

conveyor and the longest

drying time before the

conveyer stacks the

media.

Modifications to the

amount of time the

conveyer continues to run

after printing a record is

done through the

CONVEYER TIME

option in the MAIN

MENU. See Section

Conveyer Time for more

information.

The following Schematic and Diagram of the Teleco

Connector port show where the microprocessor signals to

control the conveyer is found. Use the following Schematic to

get the conveyer signal.

Revision C 30K USERS MANUAL Section 3 -

P/N 90-00203-001

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 118 119

No comments

Bryce 30K Specifications Page 13