Bryce 30K Specifications download pdf (Page 32)

Basics

5. Position the Side Guides

A. Place a sample piece or

trial stack of material in

the input area.

B. Slide the side guides

until they almost touch

the stack of material.

Check that there's about

1/16 inch (1.5mm)

clearance between the

guides and the stack.

NOTE: Proper clearance is important. If you push

the side guides tight up against the stack, they could

retard feeding and cause jams. If the clearance is too

great, pieces could skew as they feed into the printer.

Sideguides

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 115 116

No comments

Bryce 30K Specifications Page 32